Boat Trailer bearings
I have a Becktons boat trailer for my Arvor and I'm looking to replace the wheel bearings.I have found out that Beckton trailers Ltd seized trading, so does anyone know where I can purchase new...
View Articlecooling hose
Anyone tried changing the hose from the strainer too the cooler under the control box on a 215 looks like it's an engine out job
View Articleengine bay extinquisher
I do not have an extinguisher in my engine bay in my 2005 Arvor 215as vw100 hp , can somebody advise me on the correct size etc. that I should be fitting please .
View ArticleFuel filter/air lock
Hi, I want to put a new fuel filter and housing on my boat, I was thinking a racor 500fg, would this work or would a smaller one do? or what gallons per hour do I need? Its an Arvor 230 wit cummins...
View Articlevandals
hello guysmy 215 was visited by thieves o/nite ...lots of fishing gear gone ...the port centre and starboard hatch locks have been damaged ..the small pins that lock are no longer there ....any ideas...
View ArticleCan you help identify the material that my wondscreen is made of
HelloI own a 2005 Quicksilver 750 weekender , recently I discovered that Arvor and Quicksilver have linkages ( anyone know what that link is?) and I obtained 2 new WE wiper motors from an Arvor...
View Articleengine bay extinguisher
Anybody know the cubic capacity of the engine bay on an Arvor 215 AS with a VW 100 hp so that i can fit the appropriate size extinguisher , 1kg or 2kg ?
View Article250 owners with 2.8 QSD engine
Hello all..Im a new member & currently own a 230 (which has been a great boat), but am hoping to upgrade to a 250 with a 2.8 QSD engine.Q 1In your experience what is the top speed of this boat? as...
View ArticleProps away - Cummins engined 215
I have read with great interest the previous Props Away thread from back in 2011, particularly Dave's comments on repitching his prop and the benefits gained. The 2.0ltr Cummins has slightly more power...
View ArticleWindow Frame
I wish to remove the small side window and frame on my 215 but cant see what holds it in looks glued on,anyone had one out to paint the frame.Help please.Thanks T.J.
View ArticleWanted Arvor 20 to 230
Greetings to all, I am new to this forum a friend (also a member on here) suggested I join as the wealth of experience and knowledge of its members would be invaluable to me in my search to buy an...
View Articlenavman 5500
My navman 5500 gpsWill not lock on to says it also keeps going back to 2003 anyone any ideas
View ArticleCAPPINGS
Can anybody tell me what is succesfull in treating the timber cappings on my Arvor 215 as on top of the gunwhales please .
View ArticleBait pump
I have a 2005 Arvor with the bait pump fitted in a box section in the rear of the boat where the intake for the pump protrudes through the transom via a strainer , does anybody know what pump this is...
View ArticleBait pump switch..
Evening,a subject that I'm sure has paugued many of us. Dodgy switches. Does anyone have a link to a direct replacement part? Stu? Are you on to this??
View Articlefirst service
I know Dave did give me the details of the Cummins mercruiser authorised dealer for the Southampton area but I've mislaid it the new boats arrived, she runs like a dream, and were rapidly approaching...
View ArticleWindscreens 250as
Hi all,I have a 2004 250as with a spotless windscreen, no scratches from wipers ect , perfect condition, so I am wondering, is it glass or plastic , I would have thought if it were plastic it would...
View ArticleHull thickness on a 250as (7mm)
Decided to fit a Raymarine P319 'thru hull' transducer to my brand new 250as yesterday. Boat is on blocks while I fit it out. Wife and I spent at least an hour deliberating on where we should drill the...
View ArticleLife raft, yes or no?
How many of us boaters have invested in one, is it a 'must have' piece of kit, anybody had any personal experiences where it saved them or do most of us just go out there on a wing and a prayer?I read...
View Article215as Boat length
I am thinking of having the antifoul removed and need to know the length at waterline to get a quote, can anyone help? Also has anyone has this done and was it worth it?Thanks, Mark
View Article