scuppers
Hi all,on my 215 (2006) there are two indentations on the deck, one each side just at the forward end of the lift up side seats, all they do is gather water and fish guts, does anyone know what they...
View Articlearvor230
vw 150 or nanni witch is the best engine for the arvor 230as I am looking at an arvor 230 vw150 at the moment any help with wood be appreciated do the vw150 give trouble thank you
View ArticleArvor 18/20 Sea-cock
Just a quick question, are they manufactured in bronze or brass? do they need to be changed regularly? no leaks from it touch wood!many thanks
View Articlearvor 230as
I am looking at an arvor 230as with a cummins 150hp engine I am trying to find out do they give any known problems before I buy the boat thank you
View ArticleNavman 5505
Seem to be having a few problems at the moment. Latest is that screen on my 5505 plotter won't light up. Everything is functioning as you can see the chart very faintly but it seems that the backlight...
View ArticleInsuring your arvor
Hi guys just wondering if any of you have any advice on where to insure an arvor 230 cheers.
View ArticleAsking for an electric outboard
Hi all:A couple of days ago I had a mishap with my engine VW 100/5. Since I've changed my ship to have greater security in open seas, I'm a little disappointed by this fault which, according to the...
View Articleworkshop manual
I am looking for a workshop manual for commins QSD2.O 150HP engine can any won help me in my search thank you
View ArticleDeck Cover
Hi All,I would like to get a canopy deck cover complete with the supporting framework with windows, zip up sides and rear for an Arvor 215.Does anyone have contact details for a manufacturer on the...
View ArticleNut size of engine mounts
I have a vibration in my boat when I exceed 2000 rpm. When the boat was out for antifouling the prop was taken away and balanced, on my last trip I hit a submerged log which put one blade out of line....
View ArticleLooking for advise abt electric outboards
Hi all:A couple of days ago I had a mishap with my engine VW 100/5. Since I've changed my ship to have greater security in open seas, I'm a little disappointed by this fault which, according to the...
View ArticleThanks Stu
Big thanks to Stu for supplying my anodes+bolts at very short notice.No need to go anywhere else for Arvor parts from now on.
View ArticleWrong Hole!!!
A word of warning. Our other owners took the boat out on Tuesday, refuelled with 20l from can but put it in the rod holder instead of the fuel inlet. All went into compartment underneath then drained...
View Articleshade of VW engine
Hi All,I read some time ago on a post about the shade of the VW engine,I should have made a note then, I know it is white but which white!!, I want to get some touch up paint to blend in a couple of...
View Articletrailer
I am looking to buy a trailer for my arvor 230as witch trailer wood be best for the boat
View Articlearvor 230as
yes I have got the boat I have been waiting for an arvor 230as 2009 lovely boat just a good service and new trailer and out fishing. can't what I wood like to thank you all for all the advice I got
View ArticleR shaped stainless clip found in the bilge.
As the title..I had a good clean of the bilge today and came across a stainless r clip type thing.I can't think what it is from. Anyone got any ideas? I've had a brief check over and not see anything...
View Article250 black or white engine
Hi all,I am selling my 230 07 to upgrade to a 250 and am wondering if anyone can help me decide with their experiences, whether its worth spending the extra money to buy one with the newer white engine...
View ArticleArvor 20 port window required?
Hi,Anyone know where I could get a new port side window for my 2003' arvor 20 fisherman? Noticed mine got a bad crack and will no doubt get much worse! Any info would be greatly appreciated.
View Articlerope cutters
can any one tell me wots the best rope cutter for the arvor 230 and where can I gat the rope cutters from thank you
View Article